PWS4-48
48V 4x V-lock battery Power Station
Specifications:
- Input: 1 to 4 installable batteries, hot swappable
- Output: 4 simultaneous
2x regulated 48V, max 560W
2x regulated 14V, max 340W - Display: 20x4 backlighted LCD
- Size: 170 x 150 x 280mm (6.39" x 5.91" x 11.02")
- Weight: 2.20Kg (4.86lbs)
Description
The BLUESHAPE power station concept is a convenient system to integrate the power of multiple V-lock batteries into a unique source that can be tapped anywhere anytime in a simultaneous dual voltage output.
The 4 available outputs, 2 at 14V (4-pins XLR) and 2 at 48V (3-pins XLR) operate in parallel an share the avaialble power in input: the output power is available simultaneously from all ports.
Due to the highly efficient internal electronics, over the 92% when delivering higher loads, the system remains cool even after hours of operation for a safe and prolonged system reliability.
Depending on which batteries are installed, the quad system can supply power as follows:
Installing 4x BV batteries, HD models (high drain):
The 4 available outputs, 2 at 14V (4-pins XLR) and 2 at 48V (3-pins XLR) operate in parallel an share the avaialble power in input: the output power is available simultaneously from all ports.
Due to the highly efficient internal electronics, over the 92% when delivering higher loads, the system remains cool even after hours of operation for a safe and prolonged system reliability.
Depending on which batteries are installed, the quad system can supply power as follows:
Installing 4x BV batteries, HD models (high drain):
- up to 340W on the 14V output
- up tp 560W on the 48V output
- up to 280W on the 14V output
- up tp 480W on the 48V output
Batteries are hot-swappable to keep providing constant power without interruption, even when a battery becomes empty and needs replacement (if the remaining batteries are capable to compensate and deliver more current).
A display is provided to show each individual battery’s state of charge and the actual power generated by the station, for easy monitoring of the operation.
The LCD rotate the information on 2 pages to show all the relevant data:
Page 1:
For each installed battery:
- the state of charge is shown in percentage, as read from the battery brain (for BLUESHAPE compatible batteries) or deducted through the battery voltage
- A graphical current gauge on a 0~10A scale displays the amount of discharge current provided by each battery, where 10A is the maximum possible for each channel.
On the right side, it is visible the total power delivered on the 28V and 14V outputs.
Page 2:
For each installed battery, the following further data are shown:
- the pack voltage
- the actual current delivered in Amps
On the right side, it remains visible the total power delivered on the 48V and 14V outputs.
Details
 |
Practical handle |
 |
LCD Dislay showing the state of charge and the actual current deivered by each battery, the voltage of each battery and the total power delivered by PWS4-48 |
 |
Battery bay #1 and #2 |
 |
Battery bay #3 and #4 |
 |
14V outlet (max 340W) over two paired 4 pin XLR sockets |
 |
48V outlet (max 560W) over two paired 3 pin XLR socket |
 |
Fan vent |
 |
Illuminated ON/OFF switch |
 |
Data socket for computer testing, debugging and calibration |
 |
Battery state of charge in percentage, as read from the battery brain (for BLUESHAPE compatible batteries) or deducted through the battery voltage |
 |
Graphical current gauge on a 0~10A scale showing the amount of current released instantly by each battery (10A is the maximum drain that can be released by each channel) |
 |
Total power delivered instantly on the 48V and 14V outputs |
 |
Pack voltages |
 |
Actual current delivered by each battery |
Downloads
Manual
 PWS4-48 Operator Manual - Version:1.0 (2.79 MB) |
Operator manual for PWS4-48 in English |
