28V 2x V-lock battery Power Station


  • Input: 1 to 2 installable batteries, hot swappable
  • Output: 2 simultaneous
    1x regulated 28V, max 280W
    1x regulated 14V, max 170W
  • Display: 3 LEDs gauge per battery
  • Size: 250 x 145 x 80mm (9.84" x 5.51" x 3.15")
  • Weight: 0.75Kg (1.55lbs)


The BLUESHAPE power station concept is a convenient system to integrate the power of multiple V-lock batteries into a unique source that can be tapped anywhere anytime in a simultaneous dual voltage output.

The 2 available outputs, 14V (4-pins XLR) and 28V (3-pins XLR) operate in parallel an share the avaialble power in input: the output power is available simultaneously from both ports.
Due to the highly efficient internal electronics, over the 90% when delivering higher loads, the system remains cool even after hours of operation for a safe and prolonged system reliability.
Depending on which batteries are installed, the dual system can supply power as follows:

Installing 2x BV batteries, HD models (high drain):
  • up to 170W on the 14V output
  • up tp 280W on the 28V output
Installing 2x standard BV batteries (normal discharge):
  • up to 140W on the 14V output
  • up tp 240W on the 28V output

Batteries are hot-swappable to keep providing constant power without interruption, even when a battery becomes empty (if the remaining battery is capable to compensate and deliver more current)..

An array of LEDs is used to indicate the level of current delivered instantaneously by each battery, giving the user the indication of the load each battery is withstanding:

  • Lower LEDs: blinks for current delivered up to 1.5A, steady for current over 1.5A
  • Middle LEDs: blinks for current delivered up to 4.5A, steady for current over 4.5A
  • Upper LEDs: blinks for current delivered up to 8A, steady for current over 8A


Practical handle
LED Dislay showing the actual current output delivered by each battery. 3 LEDs describe a 0~10A scale
Battery bay #1  
Battery bay #2
14V outlet (max 170W) over a 4 pin XLR socket
28V outlet (max 280W) over a 3 pin XLR socket
Illuminated ON/OFF switch
Fan vent
Rotating foot for improved stability: to open when batteries are installed, to close to stow PWS2
Data socket for computer testing, debugging and calibration


PWS2 front side
PWS2 front side
PWS2 front side
PWS2 back side
PWS2 back side
PWS2 front panel
PWS2 back panel
PWS2 with batteries
PWS2 with batteries
PWS2 with batteries
PWS2 with batteries



PWS2 Operator Manual - Version:1.1 (891.00 KB) Operator manual for PWS2 in English

This website uses cookies to manage authentication, navigation and other functions.
To find out more about this, view our Privacy Policy.
By using our website, you agree that we can place these types of cookies on your device.