
Specifications:
![]() |
![]() |
Tight Control and battery diagnostics in real time
Remotely check the state of charge and the remaining runtime updated in real time based on the actual load conditions. Watch the pack inner temperature, the single cells voltage level and the cycle counter.
Entire fleet monitoring from a single device
All batteries connect to the same Wi-Fi network so that one or more smartphones with the App installed can connect and receive data from all the batteries at the same time without the need of special pairing procedures.
Safeguard your property
Avoid unauthorized use of you battery packs by locking when not in use. They will stop releasing any power although enabled to charge. Password protected.
Rental control: Optimize the lease period of your assets
Limit the usage of the battery packs that you rent to just the period your customers have paid for, either a number of days or a certain amount of runtime. When these expire, whichever comes first if both are set, the battery pack will stop releasing power. The user is always notified of the residual runtime through the App.
Customize your setup as needed, by temporarily changing each battery name and rearranging the list to help you to easily identify the battery in use | |
Find your battery: push a button on the screen and make the topmost rgb LED of your battery to flash to spot it easily among the other | |
Receive alerts when batteries are close to empty or close to full |
GRANITE, RUGGED AND RELIABLE
![]() |
LED gauge and push button for capacity check. Each LED accounts for 20% of state of charge. When the capacity falls below 10% the lower (right-most) LED blinks. Press and hold the push button for at least 5sec to enable and disable the embedded Wi-Fi module. |
![]() |
Rubberised coloured gasket for shock absorption and water resistance improvement |
![]() |
Auxiliary outputs from D-Tap sockets (14.8V nominal) with independent overload protection |
![]() |
High endurance rubber caps for protection of the D-Tap sockets when not in use |
![]() |
D-Tap socket for Auxiliary output (14.8V nominal) enabled as charging inlet for usage with BLUESHAPE D-Tap chargers. There is no independent protection implemented on this socket. An overload or a short-circuit causes the pack protection to trip temporarily. |
![]() |
Outer case tightened by 8 screws for maximum toughness and case rigidity during impacts and shocks |
![]() |
Rear product label showing model, capacity, rating, serial number and calculated lithium content. Further details include safety instuctions, CE marking and recycle and disposal symbols |
![]() |
Metal V-bracket with high precision |
![]() |
Inner metal reinforcement plate |
![]() |
Robust thick-walled housing made of special plastic resin for superior impact resistance. The battery can withstand several drops from altitudes of up to 2 metres without breaking or suffering internal damage |
![]() |
Contact block made of special materials and able to withstand high current draws up to 12A. A contact cover is included with each battery to render air transportation even safer |
BLUESHAPE GRANITE field test
Watch this out! this is what we mean with GRANITE: our batteries are really rock solid! (courtesy of ONYX CINEMA)
GRANITE V-Lock battery cliff test
The new GRANITE V-Lock batteries are really tough and rock solid, see what happens if they jump from a cliff...
Manual
![]() |
GRANITE TWO V-Lock series operator manual |
Charts
![]() |
Discharge performance of BV190HD at various loads |
Certifications
![]() |
CE certificate of conformity for BV190HDtwo |
![]() |
UN38.3 IATA Transport declaration for BV190HD |
![]() |
Ingress Protection certificate for BV190HD against dust and water |
![]() |
Material Safety Data Sheet for batteries |
Application Notes
![]() |
2014 update of the IATA air transport regulations for rechargeable lithium ion, with a dedicated focus on BLUESHAPE batteries range |