Through this function it is possible to modify the battery settings by reprogramming some parameters in the firmware through special patches, called DFL settings.



The main table displays the collection of DFL settings installed locally and available for uploading to Blueshape® batteries.
Only the DFL settings existing in this local table can be used with batteries.

There are two possibilities for collecting DFL settings:

  • Downloading from Blueshape®, through online cloud services
  • Importing from DFL files


The first time this function is used, it is necessary to populate the local table by downloading all the available DFL settings. This function is achieved by clicking the button "UPDATE": new data are retrieved and saved locally, if available.
It is also suggesteable to refresh and update the local table from time to time, to have always all the latest DFL settings available.

It is a task of our support service to prepare and publish new DFL settings when needed.


In case a special customized setting is needed, because not available among those published online, it is possible to send a request to our customer service and have it done by purpose. Only in this case, it is necessary to upload the received DFL file it in the local collection by pressing the "IMPORT FROM FILE" button, and follow the instructions.


The local DFL table can be further managed by removing settings no more needed, just by selecting the desired row and clicking the "REMOVE" button.


To apply a DFL patch and modify some parameters in the battery firmware, just select the desired patch from the table and click the "APPLY TO BATTERY" button:
the battery is temporarily halted when the new data is being uploaded (it may take up to 20 seconds), and must not be disconnected during this time.
At the end of this operation may be necessary to reset the battery to allow the modified settings to take effect.